Home » About Us » News

News


LED Headlights Fog Lights Installation

Time: 2019-09-03

Step 1

Go to our website, calais-lighting.com to find the right LED Conversion Kit for your car.

The two possible results for headlights are as follows:

1) Low Beam headlamp & High Beam headlamp - the high and low beams use two separate bulbs

2) High & Low Beam headlamp - the high and low beams are combined in one bulb

Those results depend on the automotive constructor bulb fit used on your make and depending on the car you might need to purchase two separate kits to convert your high and low beams.

You will also see on the result page that you can convert many other halogen bulbs. By scrolling down you will see all available bulbs by Car Lighting District for your car.

 

Step 2

Before to start the installation make sure the engine is off and keys are removed from ignition.

Once you receive your LED headlights, pop the hood and locate your headlights bulbs. If you have two separates bulbs make sure to differentiate Low from High beams.

For most cars, the installation process won't need to remove any other components to access to the bulbs it will be as easy as changing the original bulbs.

Remove the old bulbs, put in place your LED bulbs in the same original socket and plug the LED wire to your original plug. You will receive 3M tape and tie-wrap to make sure the LED driver is located in the area and won't be moving while you're driving.

Make sure to not touch the LED chips with your hands during the installation.